www.Calorique.com - Radiant Floor Warming is the ultimate in comfortable and economical heating for your home or work space. With the Calorique Radiant Ceiling Heating System, it is also the easiest system to install. Far less expensive and difficult to work with than hydronic systems.
Saturday, November 19, 2011
Friday, November 11, 2011
Takagi T-KJr-P Propane Gas Tankless Water Heater - 140k BTU
!±8± Takagi T-KJr-P Propane Gas Tankless Water Heater - 140k BTU
Rate :
| Price : $665.00 | Post Date : Nov 11, 2011 14:03:53Usually ships in 3-4 business days
Released in 2003, the T-K Jr. is the smallest water heater in the Takagi tankless line. But this small, but powerful unit - with gas inputs up to 140,000 BTU per hour - can meet all the hot-water needs of a small American home or apartment with one or two bathrooms, as well as smaller commercial applications. Designed to virtually do anything a 40-gallon tank-type water heater can do and more, the compact, wall mounted T-K Jr. can support hydronic baseboard or radiant floor heating applications, as well as provide domestic hot water to plumbing fixtures and appliances. The T-K Jr. has an efficiency rating of 81%, using natural gas, and 83% with propane. At an average (rise in temperature) of 60°F in warmer areas - where the winter ground water is 60°F and with the output set at 120°F - the unit will provide 3.8 GPM, or 228 GPH. In colder areas where the input temperature may be 40°F or less you can expect a flow rate of about 2.7 GPM or 162 GPH. Cost-efficient and environmentally friendly, the T-K Jr. can be converted into a direct-vent unit by using the optional TV09 conversion kit for installation in a garage, a utility closet or any confined space in which makeup air may be limited. Please refer to "Accessories" for more information on venting options. Using the average of 60°F input water cited above, the T-K Jr. can provide enough hot water for one shower and a lavatory basin at a time; or one low-flow shower (2.5 GPM or less) and an appliance, such as a dishwasher or washing machine, at the same time. For much colder input temperatures, such as 40°F or lower, this unit can provide endless hot water for consecutive uses; that is, running only one major fixture at a time. Please refer to the flow charts for specific rates. The four preset temperatures on the unit are: 113°F, 122°F, 140°F, and 182°F. To achieve any temperatures other than those presets, your client will require the TK-RE20 temperature controller.
Monday, November 7, 2011
3/4" PEX Tubing with Oxygen Barrier for Heating, Snow Melt (300ft)
!±8± 3/4" PEX Tubing with Oxygen Barrier for Heating, Snow Melt (300ft)
Brand : Everhot | Rate : | Price :
Post Date : Nov 07, 2011 17:48:42 | Usually ships in 1-2 business days
| Price : Post Date : Nov 07, 2011 17:48:42 | Usually ships in 1-2 business days
300ft roll of 3/4" PEX Tubing with Oxygen Barrier for use in hydronic, radiant heating and snow melting systems. Certified for use in radiant floor heating applications.3/4" PEX Tubing with Oxygen Barrier is the most popular size for all snow melt projects. According to RPA Standard Guidelines, 500ft is the recommended circuit length for the 3/4" Oxygen Barrier PEX Tubing, when used for radiant floor heating applications. For snow melt applications, 300ft length is considered more appropriate.
More Specification..!!
Subscribe to:
Posts (Atom)
|
|
|
|
 |
 |
 |
 |
 |
 |
 |
 |